Effect of Static Magnetic Field on Photocatalytic Degradation of Methylene Blue over ZnO and TiO2 Powders

Magnetic field effects (MFEs) on photocatalytic degradation of methylene blue (MB) solution over ZnO and TiO₂ powders are investigated under static magnetic field up to 0.7 T with light irradiation by ultraviolet (UV) light emitting diode. The UV–visible-near-infrared spectrometer is used to monitor the MB concentrations. The positive MFE is observed for ZnO, while the negative MFE for TiO₂, and both MFEs are increased with the increase in the magnetic field applied. By increasing the settling time (the time interval between the preparation of MB solution and the powder dispersion into the MB solution), the photodegradation abilities under MFEs are decreased for both the catalysts. The cause of MFE is discussed in terms of dissolved oxygen in the MB solution and magnetic adsorption of the constituent molecules.     

The Dirichlet ring and unconditional bases in L 2[0, 2π]

It is observed that the Dirichlet ring admits a representation in an infinite-dimensional matrix algebra. The resulting matrices are subsequently used in the construction of nonorthogonal Riesz bases in a separable Hilbert space. This framework enables custom design of a plethora of bases with interesting features. Remarkably, the representation of signals in any one of these bases is numerically implementable via fast algorithms.     

Development of a stable isotope dilution UPLC‐MS/MS method for quantification of dexmedetomidine in a small amount of human plasma

Dexmedetomidine (Dex) is a selective central α2‐agonist with anesthetic properties and has been used in clinical practice for sedation in the intensive care unit (ICU) after operations. In this study, an analytical assay for the determination of Dex in a small amount of plasma was developed for the application to pediatric ICU trials. The quantification of Dex was constructed using the original stable isotope Dex‐d₃ for electrospray ionization‐tandem mass spectrometry (ESI‐MS/MS) in the selected reaction monitoring mode. A rapid ultra‐performance liquid chromatography technique was adopted using ESI‐MS/MS with a runtime of 3 min. Efficacious concentration levels (50 pg/mL to 5 ng/mL) could be evaluated using a very small amount of plasma (10 μL) from patients. The lower limit of the quantification was 5 pg/mL in the plasma (100 µL). For sample preparation, a solid‐phase extraction was used along with the OASIS‐HLB cartridge type. Recovery values ranged from 98.8 to 100.3% for the intra‐ [relative standard deviation (RSD), 0.9–1.3%] and inter‐ (RSD, 0.9–1.5%) day assays. A stable test had recovery values that ranged from 97.8 to 99.7% with an RSD of 1.0–1.9% for the process/wet extract, bench‐top, freeze–thaw and long‐term tests. This method was used to measure the Dex levels in plasma from pediatric ICU patients. In the clinical ICU trial, the small amount of blood (approximate plasma volume, 200 μL) remaining from blood gas analysis was reused and targeted for the clinical analysis of Dex in plasma. Copyright © 2013 John Wiley & Sons, Ltd.     

Optimal investment with two-factor uncertainty

This paper presents a real options model to value the option to invest in a project contingent on two stochastic factors. A general sensitivity analysis is conducted highlighting the importance of the variance and correlation between the two variables. A higher correlation is shown to increase always the values of the trigger, the active project and the option. The impact of uncertainty is more complex and depends on the assumption about which variables adjust and the correlation between the variables and the market.     

Morphological studies of a hydrogen-bonded LC polymer obtained by photopolymerization in LC solvents

Anisotropic morphologies and the phase behaviour of a hydrogen-bonded LC polymer obtained by photopolymerization in two kinds of LC solvent are discussed. The hydrogen-bonded LC monomer, 4-(6-acryloyloxyhexyloxy) benzoic acid (A6OBA), was photopolymerized in 4-cyano-4′-hexyloxybiphenyl (6OCB) and in 4-cyano-4′-undecyloxybiphenyl (11OCB), which show a nematic phase and a smectic A phase, respectively. After photo-polymerization, the LC media were removed by extraction and the pure polymer was observed by scanning electron microscopy. SEM images showed that the polymer possessed fibrous morphology with a fibre diameter of a few micrometers, based on polymerization-induced phase separation. The overall geometries reflected typical LC characteristics such as schlieren and focal-conic fan textures. It was found that the hydrogen bond between benzoic acid groups in the monomer was rigid enough to fix the anisotropic phase-separated structure forming during the early stage of phase separation; however, it could not permanently maintain the fibre structure due to dissociation at elevated temperature. X-ray measurements revealed that a well developed layer structure of the hydrogen-bonded mesogen existed in the polymer obtained from the smectic phase of 11OCB, whereas a polymer layer structure could develop only partially from the nematic phase of 6OCB.     

Reaction of N-(Benzyloxycarbonyl)aminobenzyl-phosphonous Acid with Ethyl Orthoformate

Reaction of N-(benzyloxycarbonyl)aminobenzylphosphonous acid with ethyl orthoformate afforded two major products diethyl N-(benzyloxycarbonyl)aminobenzylphosphhite and ethyl (diethoxymethyl)[N-(benzyloxy-carbonyl)aminobenzyl]phosphmate, a product of addition of phosphonous acid to orthoformate.